How to Winterize a Pressure Washer

To extend the life of your Mi‑T‑M pressure washer, proper maintenance is a must. This includes winterizing the pressure washer pump. Follow these steps on how to properly winterize your pressure washer. We explain the steps for a gas pressure washer and an electric pressure washer.

Important Note: You will need the Mi-T-M pump saver solution for these steps.

Getting Started → Winterizing A Gas Pressure Washer

For electric pressure washers, follow these steps.

1. Disconnect the hose, the gun and wand assembly from the pressure washer, draining as much water as possible from them.
2. Attach the pump saver directly to the water inlet.
3. Turn the knob on the bottle to the open position.
4. Pull on the recoil a couple of times until the liquid coming out is 100 percent solution.

Getting Started → Winterizing An Electric Pressure Washer

1. Disconnect the hose, the gun and wand assembly from the pressure washer, draining as much water as possible from them.
2. Attach the pump saver directly to the water inlet.
3. Turn the knob on the bottle to the open position.
4. Squeeze the bottle while turning the motor on, until the liquid coming out is 100 percent solution.

Once Winterizing is Complete → Safe to Store

1. Safe to store your Mi-T-M pressure washer in a garage or building that does not freeze

Check out the electric and gas pressure washers Mi-T-M has to offer.

Thanks for watching our tutorial on how to winterize a power washer. For more tutorials on how to use a pressure washer, visit our channel on YouTube.